Compuspot 8000SD, Spectratek 8000S Short Wave Infrared Curing Lamp

8x 1,000 watt infrared short wave lamps on 2 independently adjustable heads provide the maximum 3,081 sq. in.(2m²)cure area. Cure area is uniform and focused with no hot or cold spots. Each array of 4 lamps may be adjusted to conform to the contour of the panel.

Thermal Integrated Sensor System (TISS) allows for fast set up and automatic regulation: Distance sensor emits audible tone for setting the proper distance from the panel. Heat sensor automatically adjusts the temperature throughout the curing process.

Cures on any substrate. Cures primer in 3 to 8 minutes, water based filler in 7 to 9 minutes.

Modulated ramp-up time for maximum control and heat transfer.

Temperature on the painted surface:
The temperature varies from 20°C to 90°C with 1,000W light bulb.
The temperature varies from 30°C to 180°C with 2,000W light bulb.

Easy digital control.

Auto Timed Shut-Off: Reduces chance of damage to finish due to overheating.

Heavy duty stand with movable arm and a locking caster allows the lamp head to be positioned to panels from the rocker to the vehicle roof. (Note: Appropriate 220 volt plug must be installed by user.)

TISS first helps you position the curing unit for optimum heating with an ultrasonic sensor.

The sensor beeps when the unit is too far away or too close, and becomes a continuous tone when the unit is at the ideal distance from the vehicle.

Secondly, the integrated timer allows you to preset ramp times.

Thirdly, state of the art optical sensor and electronics regulate the heating temperature based on the panel temperature desired. The spectratek system independently maintains a constant temperature thereby ensuring the highest quality finish even with a novice operator, without fear of over baking heat sensitive substrates.