IDK-4.5 GREEN DIRT KILLER NOZZLE 4700 PSI

Blast dirt, grime, slime, mold, mildew, etc. off instantly using the Dirt Killer nozzle. Save chemical, water, time, and money. The Dirt Killer generates a whirl wind of water droplets so powerful the imbedded dirt is blown away. Dirt Killer nozzles, which feature a rotating turbine, deliver the punch of a zero degree nozzle with a 25 degree fan, creating 10 times the cleaning impact of a standard flat tip nozzle.

Industrial Dirt Killer is the world's most powerful cleaning nozzle. It also features a spinning head, which moves at a much slower speed to produce large water droplets that deliver a devastating blasting force. The IDK has the ability to attack and thoroughly clean 3-dimensional surfaces such as concrete and steel. Difficult cleaning projects, such as crab pots, hog confinements, farrowing crates, milk barns, and many others, are made easy with this incredible tool.

By using properly, the Dirt Killer will perform as follows:

• at 3000 PSI aproximately 250 to 400 hours:
• at 2000 PSI approximately 300 to 500 hours:
• at 1000 PSI approximatley 400 to 700 hours before rebuilding or replacing.

TO PROPERLY SIZE THE CORRECT NOZZLE, SELECT HELP AT THE TOP OF THIS PAGE. THEN SELECT NOZZLE CALCULATOR AND ENTER THE APPROPRIATE INFORMATION. If the nozzle size required is not available, use the next size larger, i.e. if your machine normally takes a 4.0 nozzle use a 4.5 Dirt Killer.

SERVICE ADVISORY: Using a high pressure filter increases the life of the IDK nozzle. When using with hot water, it is strongly recommended you use the filter and lubricate the nozzle every 2 to 3 hours with a teflon blended oil. Do not touch rotating water pattern. ALWAYS START WITH THE NOZZLE POINTING TOWARDS THE GROUND.

• Works best with pressure regulated unloader. Flow actuated unloaders reduce Dirt Killer Life.
• Nozzles are color coded
• Maximum Pressure: 4700 PSI
• Maximum Temperature: 180 Degrees F.
• Inlet Thread: 1/4" FPT

Thank you for browsing our selection of pressure washers, steam cleaners and accessories.

We have the tools you need to effectively use and maintain your pressure washer.  Quick connect and rotating turbo nozzles are available in various sizes and configurations.  It's important to use the proper size nozzle for your pressure washer.  Nozzles are sized by looking at the PSI and GPM of your pressure washer.  Quick connect nozzles make it easy to change spray patterns or replace nozzles when they are bad while using the same spray wand.

Pressure washer hoses and hose reels will help you reach your work area, and specialized spray guns with different angles and lengths of wands will make certain jobs easier.

To keep your pressure washer working properly, routine parts and maintenance could be required.  Pressure washer pumps, unloaders, and motors should match the specifications of your particular machine.  Hot pressure washers and steam cleaners require additional components like burners, ignitors, and fuel pumps to allow them to heat the water.

There are a number of different accessories for your hot or cold pressure washer to clean different areas.  Surface cleaners are great for cleaning large areas like parking lots, gas stations, industrial facilities, and school yards.  Duct cleaners are designed to clean trash-chutes, vents, ducts, restaurant hoods, tanks and more. Wet sand blasters can be used on various surfaces to remove most coatings down to white metal, for graffiti cleaning, or paint surface preparation.