P.M.R. EZ3040G-VRT3-310EZ W/BYPASS & THERMAL RELIEF

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-250 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.

FEATURES:

• Solid ceramic plungers
• Standard SAE J609 gasoline mounting flange for up to 13 hp engines
• Forged brass manifold with an exclusive lifetime warranty and 4:1 hydrostatic rating
• Die cast, anodized aluminum, oil bath crankcase
• Premium roller bearing
• Unitized stainless steel inlet and discharge valves
• Available in "L" left handed version

PECIFICATIONS:

• Triplex Plunger Pump
• Direct Drive with Gas Flange
• Maximum Volume: 4.0 GPM
• Maximum Discharge Pressure: 3000 PSI
• Maximum Inlet Pressure: 125 PSI
• Maximum Pump Speed: 3400 RPM
• Minimum Horsepower Requirements: 12.3 hp for gas engine
• Bore: .591" (15mm)
• Stroke: .374" (9.5mm)
• Crankcase Capacity: 14 oz. Nondetergent SAE 30W oil
• Maximum Fluid Temperature: 165 Degrees F.
• Inlet Port Thread: 1/2" FPT
• Discharge Port Thread: 3/8" FPT
• Shaft Diameter: 1" ID Gas Flange
• Dimensions: 8.8" x 9.7" x 6.5"
• Weight: 20 lb.

Thank you for browsing our selection of pressure washers, steam cleaners and accessories.

We have the tools you need to effectively use and maintain your pressure washer.  Quick connect and rotating turbo nozzles are available in various sizes and configurations.  It's important to use the proper size nozzle for your pressure washer.  Nozzles are sized by looking at the PSI and GPM of your pressure washer.  Quick connect nozzles make it easy to change spray patterns or replace nozzles when they are bad while using the same spray wand.

Pressure washer hoses and hose reels will help you reach your work area, and specialized spray guns with different angles and lengths of wands will make certain jobs easier.

To keep your pressure washer working properly, routine parts and maintenance could be required.  Pressure washer pumps, unloaders, and motors should match the specifications of your particular machine.  Hot pressure washers and steam cleaners require additional components like burners, ignitors, and fuel pumps to allow them to heat the water.

There are a number of different accessories for your hot or cold pressure washer to clean different areas.  Surface cleaners are great for cleaning large areas like parking lots, gas stations, industrial facilities, and school yards.  Duct cleaners are designed to clean trash-chutes, vents, ducts, restaurant hoods, tanks and more. Wet sand blasters can be used on various surfaces to remove most coatings down to white metal, for graffiti cleaning, or paint surface preparation.