TW 8030S 8.7 GPM 3000 PSI 1450 RPM 24mm SHAFT

FEATURES:

Superior Design

• Triplex uniflo design provides continuous forward fluid flow for smooth operation
• Wetted cups and floating pistons are lubricated and cooled by pumped fluid for long cup life
• Mechanically actuated inlet valves give strong lift and easy prime
• All stainless steel discharge valves are a spherical design for quieter operation
• Oil bath crankcase assures optimum lubrication
• Lubricated inlet seals prevent leakage and prolong life

Quality Materials:

• Cylinder and sleeve wear surfaces are hard chrome plated 304 stainless steel for maximum durability and abrasion resistance
• Chrome plated, brass manifolds and optional stainless steel manifolds are strong and corrosion resistant
• Heavy Duty connecting rods are made of high quality Zamak offering superior bearing quality strength
• Chrome moly crankshaft gives unmatched strength and surface hardness
• Oversized crankshaft bearings with greater loading capacity mean longer bearing life

Easy Maintenance:

• Stepped stainless steel piston rod and slinger with chrome plated 304 stainless steel sleeve allows easy replacement from front of pump
• All wet end wear surfaces are easily serviced without entering crankcase, requiring less time and effort
• Wear parts are in handy kits
• Routine lubrication checks are the only maintenance required on this precision built pump

SPECIFICATIONS:

• Maximum Volume: 3.5 GPM
• Discharge Pressure: 100 to 1200 PSI
• Maximum Inlet Pressure: 40 PSI
• Maximum RPM: 1200 RPM
• Bore: .787" (20mm)
• Stroke: .394" (10mm)
• Crankcase Capacity: 10 oz. use CAT Pump Hydraulic oil
• Maximum Fluid Temperature: 160 degrees F
• Inlet Ports: 1/2" FPT
• Chemical Injection Port: 1/4" FPT
• Discharge Ports: Dual 3/8" FPT
• Pulley Mounting: Either side
• Shaft Diameter: .650"
• Dimensions: 10.77" x 9.06" x 5.14"

Thank you for browsing our selection of pressure washers, steam cleaners and accessories.

We have the tools you need to effectively use and maintain your pressure washer.  Quick connect and rotating turbo nozzles are available in various sizes and configurations.  It's important to use the proper size nozzle for your pressure washer.  Nozzles are sized by looking at the PSI and GPM of your pressure washer.  Quick connect nozzles make it easy to change spray patterns or replace nozzles when they are bad while using the same spray wand.

Pressure washer hoses and hose reels will help you reach your work area, and specialized spray guns with different angles and lengths of wands will make certain jobs easier.

To keep your pressure washer working properly, routine parts and maintenance could be required.  Pressure washer pumps, unloaders, and motors should match the specifications of your particular machine.  Hot pressure washers and steam cleaners require additional components like burners, ignitors, and fuel pumps to allow them to heat the water.

There are a number of different accessories for your hot or cold pressure washer to clean different areas.  Surface cleaners are great for cleaning large areas like parking lots, gas stations, industrial facilities, and school yards.  Duct cleaners are designed to clean trash-chutes, vents, ducts, restaurant hoods, tanks and more. Wet sand blasters can be used on various surfaces to remove most coatings down to white metal, for graffiti cleaning, or paint surface preparation.